PDA

View Full Version : Article: Savage Action Screw Lengths


sharpshooter
09-23-2012, 05:05 PM
You can view the page at http://www.savageshooters.com/content.php?153-Savage-Action-Screw-Lengths
CH Luke
07-14-2014, 11:08 PM
Torque?
65Whelen
04-18-2016, 12:07 AM
ditto, Torque recommendation?
Rdoronila
01-07-2017, 02:09 PM
How many action screws do I need for the 18637 action (dual port, single shot, 3.4 spacing)?
oley55
03-10-2020, 02:54 PM
For my 2017, Model 10 FCP-SR, AccuStock the front screw from the factory was about 5/8" (.625) and barely captured 1.5 threads. Being fearful of it striping out, I cut down a longer (Non-Savage) screw I had on hand. It is now 0.75" and could be slightly longer, but the bolt head would definitely hang up on a 1.1" screw.