PDA

View Full Version : leupold fixed 4x on quick release rings - What base for stevens 200 in 308?



JWK1
09-21-2012, 01:22 PM
I just ordered a Stevens 200 in 308. The plan is to use it as is for the upcoming deer season, then do a complete makeover after. T&T action, new stock (might actually do that right away), custom barrel, Rifle Basix trigger.

I bought a Leupold fixed 4x on quick release rings off of ebay a number of years back that I will use. Maybe I will change the rings out for something better after hunting season, don't know yet. I am quite ignorant and inexperienced when it comes to rifle optics and mounting. I bought a Remington BDL in SS back in 1992 in 270 Win. I put a Leupold VariX II 3-9 with a 50mm OL. I was always frustrated because I couldn't get the scope back far enough for proper eye relief. Now I see that I bought the wrong mount for it, but I didn't know anything and just went with it. Just to illustrate how little I knew until the last few days when I started poking around on the net about gun optics.

Anyway, I live in central New York now and I very much doubt if I'll ever get a shot at 200 yards, and probably hardly ever over 100. I just want a nice hunting rifle that I enjoy shooting.

So what would be a decent scope base to use and be sure that I have enough eye relief adjustment? I would rather go with something on the inexpensive side in case I switch out different type rings after the season.

Suggestions? Thanks for any help!

thomae
09-21-2012, 01:57 PM
For what you want, I would recommend the Weaver 1 piece Multi Slot Tactical Weaver-Style Base for Savage 110 Series Long Action Round Rear, Matte.
It is inexpensive, and has lots of room for eye relief adjustment.

http://www.midwayusa.com/product/532016 (http://www.midwayusa.com/product/532016)

JWK1
09-21-2012, 04:15 PM
Will this still fit the short action? There is one for a short action. I don't know if the mounting holes are the same on both actions. Thanks for the link!

thomae
09-21-2012, 11:33 PM
Sorry, I thought you had a long action. Wasn't thinking. For short action, Here are your choices in weaver bases. Just remember to shorten the screws if you need to.
http://www.midwayusa.com/product/315941
or
http://www.midwayusa.com/product/735142
or
http://www.midwayusa.com/product/973274