Accutrigger for 110 stagger feed

[brettnchrism]

Do they make a Accutrigger that would fit a old 110 stagger feed action? If not what would be my next option? Tried to adjust my stock trigger with no luck, and a 5 lb trigger pull is crazy...

thanks

[rjtfroggy]

Do a search for trigger adj. "3 screw" should come up with quite a few how to's, that is what you need.
Or you can buy one of the aftermarket-SSS comp.,Timney,Rifle Basics your choice.

[brettnchrism]

OK thanks rj I will take a look I found one and followed it but this old trigger is stiff..

[HankC]

Change out the trigger spring with a lighter gauge spring wire.

[devildogandboy]

brett, here's the info if you have the 3 screw.
http://www.savageshooters.com/content.php?130-Factory-3-Screw-Trigger-Adjustment-Procedures

[brettnchrism]

thanks for the reply. devildogandboy that is the best explination i have seen yet. i need to book mark that...

[Clint KY]

I can highly recommend the trigger from Rifle Basix. Absolutely transformed the way my rifle shoots. Very consistent and crisp. The best $85 I spent building the gun.

[stomp442]

I prefer the SSS trigger over the rifle basix. Much easier to adjust and install with a much better trigger pull. IMO.