New manners T4 question

[BrotherO]

I have a new Manners T4 and would like to know what this stock is inletted for. Is this CDI or DBM? and where do I get the bottom metal/magazines? The stock is for my LRP action(4.40) that I picked up from Jim Briggs. Now let me see if I can post this pic.
http://s8.postimage.org/l306m4rrl/Manners_T4.jpg (http://postimage.org/image/l306m4rrl/)

[BoilerUP]

If you bought the stock directly from Manners, it should be on the paperwork. If not, the build number for the stock should be imprinted in the barrel channel; call the boys in KC up and they'll tell you.

That said, I believe CDI metal is a drop-in replacement for the factory DBM cutout...a quick conversation with Tom could confirm.

[BrotherO]

Thanks Boiler! I appreciate your response. I'll give Tom a call and see if I can locate CDI metal somewhere.

[BoilerUP]

You can get CDI DBM from Midway (use a coupon code!) or directly from Jeff @ CDI, who is a great guy.

Same with magazines; AICS, Alpha, Accurate-Mag all work well.

[BrotherO]

Thanks for the help Boiler, I ended up calling up CDI and getting their bottom metal.

[Captramrod01]

So tom or cdi confirmed that the cdi was a direct drop in for the factory bdm inlet? I probably would have went cdi over accurate if I'd known that.

[BrotherO]

Hey Capt, the woman I spoke to at Manners stocks says that my stock was inletted for factory detach box mag not CDI. And after contacting CDI, they said it's not a problem to remove a bit more of the stock so the CDI fits. CDI even offers to inlet it for $60. Manners and CDI were very helpful in our phone conversations. Now I can get this project started since the barrel just showed up from Lothar Walther.