MAGNUS
02-26-2010, 02:00 PM
http://i757.photobucket.com/albums/xx220/ClarkM/6mmBr100Yards03inchesSav99Vmax65gr3.jpg
http://i757.photobucket.com/albums/xx220/ClarkM/Sav99takedown6mmBRcropped.jpg
This is a take down model, but the Shilen select match 6mmPPC short take off bull barrel was reamed out to 6mmBR, which can only be shot single shot in a 99.
The barrel is too fat to allow the for stock to be installed.
The barrel is screwed in hard, with a giant Cresant wrench for an action wrench and the barrel in a barrel vise.
But it is a take down with the interrupted threads on the action.
So can that barrel be changed any easier than a normal screw in barrel on a standard 99 due to the interupted thread, or is it no different now seeing as a different barrel has been used?
http://i757.photobucket.com/albums/xx220/ClarkM/Sav99takedown6mmBRcropped.jpg
This is a take down model, but the Shilen select match 6mmPPC short take off bull barrel was reamed out to 6mmBR, which can only be shot single shot in a 99.
The barrel is too fat to allow the for stock to be installed.
The barrel is screwed in hard, with a giant Cresant wrench for an action wrench and the barrel in a barrel vise.
But it is a take down with the interrupted threads on the action.
So can that barrel be changed any easier than a normal screw in barrel on a standard 99 due to the interupted thread, or is it no different now seeing as a different barrel has been used?