Axis trigger job - Video

[mmatt]

In case anyone is interested:

http://www.youtube.com/watch?v=evfvT70togE

[82boy]

I will have to say you did a very nice job on that video. I thought the method you used was good, and it was clean and easy to understand. I have watched a lot of videos through out the yards, and this is the first time I have ever compimented anyone on a video they have made. You did a good job.

[mmatt]

Well thank you very much! :) I'm glad you enjoyed it.

[BruceH]

I did this same modification to my Axis and found it was just right. I would also like to comment on your video - Good Job! This one needs to be a sticky.

[thomae]

Nice video.
My only suggestion would be to also polish the sides of the trigger, the hanger & the spacer/washer (and any other surface that rubs) as much as possible. That will help with lowering friction which will equal a lower trigger pull.

A Dremel tool with the various polishing attachments as well as a low-priced grinder with a set of polishing wheels and a full compliment of different grits of rouge sticks have been two of my most used and useful tools.

[12fv 308]

This also worked for my friends new stevens 200...