tobnpr
09-23-2012, 04:53 PM
Thought about that...
I ended up making my own stock instead- but if you're going to install pillars (a "must" IMO), it should be simple enough to enlarge the action holes (and fill with epoxy) to fit the spacing for the older staggered-feed actions. The epoxy filler will be on the bottom of the stock where no one would see it...
I ended up making my own stock instead- but if you're going to install pillars (a "must" IMO), it should be simple enough to enlarge the action holes (and fill with epoxy) to fit the spacing for the older staggered-feed actions. The epoxy filler will be on the bottom of the stock where no one would see it...