View Full Version : What rifles does the factory 4 screw trigger fit?
nsaqam
05-17-2012, 09:30 AM
I've never seen a 4 screw in real life but what actions were they made for?
keeki
05-17-2012, 09:43 AM
Dont know exactly what all they will fit, but i have a 4screw on a la flat back and an intermediate flat back action
82boy
05-17-2012, 10:03 AM
Anything that uses that style of trigger in a 110/10 series. Somewere around 1966-2000, before the accu-trigger, and the Stevens 200 can use it as well.
nsaqam
05-17-2012, 10:28 AM
Thanks guys!
Any advantages to the four screw trigger?
What does that fourth screw do?
keeki
05-17-2012, 10:50 AM
creep, travel, safety, and ones a keeper for the the pin that holds the trigger on
cgeorgemo
05-18-2012, 01:13 AM
I've got one on my Stevens 200 LA and with a lot of patience and trial and error I've got it breaking right at 3lbs with a nice crisp feel.
I followed an article I found online about adjusting it.
Blue Avenger
05-18-2012, 11:27 AM
The originals had a pivot pin with no head the 4th screw held in place. No advantage to the next ones that had a pin with a head and C clip. No screw needed to hold them in place, eliminating a machining process. The trigger still floated between the plates. Now if you combine the 4 screw with a headed pin You could in theory hold the trigger closer to one side if the hanger plate maybe giving it a more stable support.
thomae
05-18-2012, 12:39 PM
Now if you combine the 4 screw with a headed pin You could in theory hold the trigger closer to one side if the hanger plate maybe giving it a more stable support.
Or you could shim it with feeler gauge stock.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.