PDA

View Full Version : What Odd Calibers Did You Rebarrel With



Pages : 1 [2] 3

Gmac5
05-16-2012, 01:59 PM
Rimmed cases are a bit tricky to feed but not as bad as u would think.that is, once i started using the lee enfield follower,or one made near its specs.

Gmac5
05-16-2012, 02:05 PM
On the 30/30s now i use 30 rem brass its one of the most easy to make accurate and most forgiving.
The 45acp is single stack 1911 mag fitted into a single shot stock cut tight enough for the mag and modified orig 1922 mag release ( kind of )

b()()ga
05-16-2012, 06:10 PM
22 BR
35 Whelen
6.5 x 55
22-250 AI

scope eye
05-16-2012, 06:39 PM
With all the odd calibers that have been listed here, the two I posted almost seem everyday run of the mill.

Tanks Dean

Uncle Jack
05-16-2012, 06:58 PM
Damn, the only thing I've done lately is a 22-6mm 1 in 8.

uj

jonbearman
05-16-2012, 07:16 PM
I rebarreled one in 22-250AI which is a lazer,number2 was a .260 rem,shoots very good,number 3 is a cylinder barrel in .308, number4 is 7.62x39 which is very accurate and number 5 is a .223 1in8 criterion.I prefer the mcgowens over everything else as I have had greater accuracy with their prefits.

Eric in NC
05-16-2012, 07:30 PM
Rimmed cases are a bit tricky to feed but not as bad as u would think.that is, once i started using the lee enfield follower,or one made near its specs.


Take a pic of your 7.62x54R boltface and extractor please!

Or the 45-70 - really want to see how this can work in a Savage action (don't care about feeding - looking at firing and extraction)

Tonysnoo
05-17-2012, 01:39 AM
Not sure if it's odd, but we did a 6mm SLR a few weeks back. Works very nice

hunter2
05-17-2012, 02:40 AM
375-06 imp from PacNor with a 8 twist for subsonic. 350 gr. Clearwater is great for deer. But it loves 220 gr Hornady run fast. 300 blk that was a pain in the foot until I contacted Fred and got his ejector. Anybody in for an Edge 338, 30" bull group buy???

scope eye
05-17-2012, 05:56 AM
I have a 30" 338 edge with a muzzle break on the way and it is costing me a kings ransom, I hope it's worth it, I now know why they call it a poor mans Lapua, it has done exactly that turn me into a poor man, and the barrel is the least of my problems,
1 brass OUCH
2 dies OUCH OUCH
3 powder 100+ grains a whack OUCH OUCH OUCH
4 bullets 50 per box that cost more than 100 count other calibers OUCH OUCH OUCH OUCH
I could go on

Tanks Dean

Gmac5
05-17-2012, 07:19 AM
Eric
I dont know how to post pictures or even have a digital cam,but im getting some help from a shooting buddy (i hope soon ) to post pictures of the axis stocks i make and the 45acp conversion ..
Back to the barrel and bolt face,i have tried many ways considering the rim is larger than the bolt
1 Easiest was to cut the brass to a rebated rim work intensive but most rewardin
2 method includes many wasted bolts and only so so results .it includes turning bolt face milling llug of bolt milling rear of barrel for the remaining r lug housing the extractor.
Clearly many ruined bolts trying to use existing nonmodified cases
I do enjoy challenges and as u can see have much time to try those I WONDER IF THAT WILL WORK

Corprin
05-17-2012, 10:24 AM
I have a 30" 338 edge with a muzzle break on the way and it is costing me a kings ransom, I hope it's worth it, I now know why they call it a poor mans Lapua, it has done exactly that turn me into a poor man, and the barrel is the least of my problems,
1 brass OUCH
2 dies OUCH OUCH
3 powder 100+ grains a whack OUCH OUCH OUCH
4 bullets 50 per box that cost more than 100 count other calibers OUCH OUCH OUCH OUCH
I could go on

Tanks Dean


Dean,

Want to sell that full kit ;)

scope eye
05-17-2012, 11:42 AM
Dean,

Want to sell that full kit Wink

Thanks but it will be here in a couple of weeks,
and the waiting has been even more painful
than the expenditures.

MNbogboy
05-17-2012, 01:45 PM
One of my 110s (pre-1959) usually sports a Douglas varmint 25-06...But this one shed the stainless barrel the other day and put on its small headed bolt and a Shaw .221 fireball barrel....Now a LA with a itsy-bitsy .221 might be considered a little odd...But boy does it like to shoot small groups ;D
Randy

Gene R
05-18-2012, 04:38 AM
Building a 270 wby now. Not odd but not common as a 270win it isn't.

Gene

BobT
05-18-2012, 05:35 AM
I guess my most unusual was/is my .270/08 AI. I never could get it to shoot like it should have and it turned out that the concentricity of the barrel was out to lunch. Now it is a fire form only barrel.

Bob

Idahojoe
05-18-2012, 11:26 AM
6.5x257 Roberts Ackley Improved. love it

wch
05-18-2012, 03:04 PM
Lessee...
6.5 Grendel
6mmNorma BR
6.5x47 Lapua
30 BR

Blue Avenger
05-19-2012, 10:36 PM
I guess my .416 Taylor Striker and .270 STW Rifle would be the oddest I have.

bootsmcguire
05-20-2012, 12:04 AM
30 BR
458 WM
243 AI
223 WSSM (kind weird for a Savage ::))
22 K-Hornet

and hopefully coming in the not too distant future

6mm International