tyler.woodard04
05-08-2012, 02:45 PM
stock came on the big brown truck today!! everything is here now. below are the components with pictures and info.
the donor action is a SS large shank striker with a rifle basix SAV-2 trigger installed.
http://i198.photobucket.com/albums/aa32/01edgered/7mm%20WSM%20striker%20build/KyleStrikerAction-1.jpg
the barrel is a Krieger SS 9 twist #8 standard target
http://i198.photobucket.com/albums/aa32/01edgered/7mm%20WSM%20striker%20build/IMG_2066.jpg
using center shot rifles Muscle brake
(need to take picture still)
Reamer and go gauge from PTG and recoil lug from SSS
http://i198.photobucket.com/albums/aa32/01edgered/7mm%20WSM%20striker%20build/IMG_2065.jpg
ordered the stock inleted for AICS mags, this one is from
accuratemag
http://i198.photobucket.com/albums/aa32/01edgered/7mm%20WSM%20striker%20build/IMG_2064.jpg
the stock is from XLR industries. Kyle and I went back and forth for a bit till I finally jumped in. took a bit longer than expected but it was well work it. these pics have my 6BRX barrel action in it until tomorrow.
http://i198.photobucket.com/albums/aa32/01edgered/7mm%20WSM%20striker%20build/IMG_2056.jpg
http://i198.photobucket.com/albums/aa32/01edgered/7mm%20WSM%20striker%20build/IMG_2050.jpg
http://i198.photobucket.com/albums/aa32/01edgered/7mm%20WSM%20striker%20build/IMG_2051.jpg
http://i198.photobucket.com/albums/aa32/01edgered/7mm%20WSM%20striker%20build/IMG_2054.jpg
http://i198.photobucket.com/albums/aa32/01edgered/7mm%20WSM%20striker%20build/IMG_2055.jpg
there are some more pics on my photobucket account.
tomorrow the barrel should be threaded and chambered then installed, followed by threading for the brake.
the donor action is a SS large shank striker with a rifle basix SAV-2 trigger installed.
http://i198.photobucket.com/albums/aa32/01edgered/7mm%20WSM%20striker%20build/KyleStrikerAction-1.jpg
the barrel is a Krieger SS 9 twist #8 standard target
http://i198.photobucket.com/albums/aa32/01edgered/7mm%20WSM%20striker%20build/IMG_2066.jpg
using center shot rifles Muscle brake
(need to take picture still)
Reamer and go gauge from PTG and recoil lug from SSS
http://i198.photobucket.com/albums/aa32/01edgered/7mm%20WSM%20striker%20build/IMG_2065.jpg
ordered the stock inleted for AICS mags, this one is from
accuratemag
http://i198.photobucket.com/albums/aa32/01edgered/7mm%20WSM%20striker%20build/IMG_2064.jpg
the stock is from XLR industries. Kyle and I went back and forth for a bit till I finally jumped in. took a bit longer than expected but it was well work it. these pics have my 6BRX barrel action in it until tomorrow.
http://i198.photobucket.com/albums/aa32/01edgered/7mm%20WSM%20striker%20build/IMG_2056.jpg
http://i198.photobucket.com/albums/aa32/01edgered/7mm%20WSM%20striker%20build/IMG_2050.jpg
http://i198.photobucket.com/albums/aa32/01edgered/7mm%20WSM%20striker%20build/IMG_2051.jpg
http://i198.photobucket.com/albums/aa32/01edgered/7mm%20WSM%20striker%20build/IMG_2054.jpg
http://i198.photobucket.com/albums/aa32/01edgered/7mm%20WSM%20striker%20build/IMG_2055.jpg
there are some more pics on my photobucket account.
tomorrow the barrel should be threaded and chambered then installed, followed by threading for the brake.