PDA

View Full Version : Putting a .308 barrel on a 10fp with stock .223 barrel Questions


p5200
03-22-2012, 10:23 PM
I thought about getting a .308 barrel to replace the .223 barrel on my 10fp and was wondering what all would have to be changed besides the bolt head? Thank You! :)
nate89
03-22-2012, 11:20 PM
What kind of magazine setup do you have?
p5200
03-23-2012, 04:41 PM
What kind of magazine setup do you have?
Hmn! not really sure but, I'll check into it all I know is it's not removable I think the stock uses the newer action screw spacing if that helps any. Thanks :)
nate89
03-23-2012, 11:15 PM
You most likely have a centerfeed blind magazine. You may have to switch out the mag box and follower.
p5200
03-24-2012, 01:05 AM
I believe your right about the center feed because when I was looking at B&C Gold Medalist stocks that's what stock style I needed. Thanks Again for the info! :)
GaCop
03-24-2012, 07:58 AM
If you go single shot, all you will need is the single shot follower (SSS), barrel and bolt head/baffle.
p5200
03-24-2012, 08:51 AM
If you go single shot, all you will need is the single shot follower (SSS), barrel and bolt head/baffle.
That sounds like a winner to me. Thank You! :)