Russian 5.45x39

[TRguy]

Is a barrel made in the caliber for the model 10 action?

If so would it use the same bolt face as the 5.56mm? ammo is cheap would make a great addtional barrel to have.

TRguy

[moorepower]

You need the bolt face for a 7.62X39/PPC. You need a .311 barrel

[sharpshooter]

The 5.45 is actually a .21 caliber. The surplus ammo that is available is not very accurate, 2 m.o.a. at best.

[TRguy]

You need the bolt face for a 7.62X39/PPC. You need a .311 barrel

dude you have NO IDEA of what you speak regarding my OP

[TRguy]

The 5.45 is actually a .21 caliber. The surplus ammo that is available is not very accurate, 2 m.o.a. at best.


Thanks for the info...I didn't think I would get much in the way of accuracy from the surplus stuff

Think anyone cuts a .21 barrel for the Savage action....Guess I need to measure the bolt face on my .223 and see if the 5.45 is the same.....maybe someone knows.

[das_napeth]

I'll measure my AK-74 bolt face when I get home. How exactly do I measure that?

[keeki]

cartridge base dia. is .394

[Bad Water Bill]

rim dia for 223 is .376-8 same as 5.56x45

About .020 smaller face

Bolt face work needed.

Check with some of our sponsors concerning price of work and bbl availability.

Anything can be done if you have enough time AND money

[TRguy]

Thanks for those measurements guys....Would cutting out the.014 approx from the bolt face rim weaken the bolt face too much? If so would the model 10 action strength maintain integrity if the bolt face failed?

[keeki]

no sir. all the bolt faces have the same outside dimensions

[teebirdhyzer]

let us know if you find a good deal on a pre fit barrel somewhere for this caliber. We just acquired a couple thousand rounds of this stuff, and a screw on for one of the savages would be nice.