Duramax/ sporter barrel?

[03mossy]

I am looking at stock ideas for my short action/stagger/ sporter barrel. I know the duramax is made for a varmint barrel but I see some guys are using those stocks with sporter barrels. How stupid do they look with the big gap? or is it tolerable? or should i just look at a carblite?

[pdog06]

it is tolerable in my opinion.

It will have a gap on each side, but will look fine.

I feel they are undersized a little for a varmint barrel anyway. Most of the ones Ive had i have had to open up the channel for a standard varmint barrel to clear nicely.

Hard to tell from the picture and I cant find the close-up picture, but here is a duramax I had with a sporter barrel in it.

http://i158.photobucket.com/albums/t106/pdog06_photos/gunpics012.jpg

[GaCop]

You certainly won't have to worry if the barrel is floated when it heats up!

[03mossy]

Thanks for the pic pdog. And nope, no question if the barrel would be floated. It looks fine in the pic...hmmmm

[03mossy]

it is tolerable in my opinion.

It will have a gap on each side, but will look fine.

I feel they are undersized a little for a varmint barrel anyway. Most of the ones Ive had i have had to open up the channel for a standard varmint barrel to clear nicely.

Hard to tell from the picture and I cant find the close-up picture, but here is a duramax I had with a sporter barrel in it.

http://i158.photobucket.com/albums/t106/pdog06_photos/gunpics012.jpg


Were you by chance able to find that closeup?

[pdog06]

No. Sorry, I must have deleted it or something.