PDA

View Full Version : Front action screw


stangfish
03-05-2012, 11:39 PM
Removed
hotbrass
03-06-2012, 12:06 AM
Buy them oversize and cut/grind them to the length you need.
stangfish
03-06-2012, 12:11 AM
Removed
thirty06
03-06-2012, 06:43 PM
It's all in the FAQ section at top.

Tupperware- Front=1.100
Rear =1.510

Wood - Front=1.170
Rear =1.570
Some later VLP use 1.100 front screw
MrMajestic
03-06-2012, 07:58 PM
I am running out of threads on the front ones that I grind.


Ground them twice and they are still too short huh? :D
fgw_in_fla
03-06-2012, 10:12 PM
Mr. M - we think much alike.

I was just thinking the same thing. :D