View Full Version : Criterion 6.5x47 chamber dimensions
Aircraftmech76
02-27-2012, 07:28 AM
I'm getting ready to neck turn some LC 308 reformed brass for my Lapua that I have yet to shoot. Can someone measure a piece of their fired brass on the neck and give me the dimension? I'd sure appreciate it.
Thanks guys,
Kevin
northlander
02-27-2012, 10:43 PM
Kevin,
Criterions Chamber spec sheet shows the 6.5X47 Lapua has a .2944 neck. Make sure you give your brass at least .002 for expansion.
Jim Briggs
NSS
Aircraftmech76
02-28-2012, 03:24 AM
Thank you Jim. I should have just called you to start with ;)
Do you have a reamer print you could email me?
Kevin
northlander
02-28-2012, 09:28 AM
I do not have any reamer prints. I do have a printout showing the neck, throat and freebore dimensions for each caliber offered.
Jim Briggs
NSS
Aircraftmech76
02-28-2012, 01:21 PM
That's what I am looking for exactly. Would you mind sending me that print to sheepdog419@gmail.com ? Thanks again Jim.
Respectfully,
Kevin
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.