PDA

View Full Version : Shotgun Savage Westpoint 167 series-e 20 gauge disassembly???



indeepshitnow
11-28-2009, 07:07 PM
If anyone could help, this would be completely appreciated. I have the shotgun halfway tore down, and am stuck at how to remove the trigger assembly. I tried removing the pin, but it doesn't seem to want to come out... Tried searching the net and these forums for help, but no go... :(

Blue Avenger
12-12-2009, 01:03 AM
sorry, have not been able to find anything for you.

gmasonky56
02-15-2019, 04:29 PM
I have a westpointmodel 167TD modelE 20 ga. Will not eject shells Ejector screw is missing. I need a schematic and instructions on how to remove the barrel

Big Al1
02-15-2019, 05:56 PM
You have to take off the butt stock first, the draw bolt is attached to the trigger guard. After removing the stock it relieves the pressure on the pin you are trying to take out.

Big Al1
02-15-2019, 05:59 PM
I have a westpointmodel 167TD modelE 20 ga. Will not eject shells Ejector screw is missing. I need a schematic and instructions on how to remove the barrel

http://www.answers.com/Q/How_do_you_remove_the_barrel_from_a_Savage_67_E_pu mp

J.Baker
02-15-2019, 06:31 PM
Not sure if this will help any, but it's the closest I could find.

https://www.gunpartscorp.com/gun-manufacturer/savstevspgfld/67-shotgun-series/67-ser-e