problem disassembling thre screw trigger from bracket.

[airaddict]

Im trying to strip down the trigger assembly but the three screw will not come off the bracket it sits in cuz the cross pin seems to be press fit into the trigger itself. Ive only stripped down an accutrigger before so this is foreign territory to me. How do i get that trigger out of the bracket? Currently only one side comes off( the side the half moon clips fits on).

Brian

[LHitchcox]

Is there a fourth screw threaded into the back of the retaining pin? If so this needs to be backed off.

[airaddict]

Not that i saw. The opposite side from the c clip had a wide flat head that was in a hole on the bracket. I didnt understand how to get that side off so i could remove the trigger. In the accutrigger version....that pin slides out completely.

Brian

[stangfish]

Lay the action on its side and support the trigger bracket with a something like a 2x4 or whatever. Lightly tap on the end of the pin with a drift punch. Hopefully it moves. If not there is a screw on the back of the trigger.

[short round]

What model rifle ?