1st Gen 110

[cowboybart]

Where can I find a "tactical" stock for a heavy barreled 22-250 that is a First Gen 110??
4.5" screw spacing - staggered feed

[ellobo]

Check Boyds website and see if thier short action stock will will take the magazine in your rifle. I think thier SA stock, stagger feed just might. You may have to open up the barrel channel for the heavy barrel. Finished laminates in 3 models for $97. You can have them checkered for an extra $50.

El Lobo

[cowboybart]

They only have the Classic" style for the "intermediate" action.

[ellobo]

I think the earliest "intermediate" stock had a 5.062 bolt spacing but the second iteration had the 4.52 bolt spacing in which case the other stock models may work. A measurement of the magazine position and bolt position may determine if they will work. A call to Boyds may help. I have spoken to them and they are very helpfull. Have your dimensions handy. The 2 stocks I got were the standard style "JRS" model. They didn't have the Prairie Hunter avaialble at that time.


El Lobo

[cowboybart]

The 5" spread is for a long action

[Nor Cal Mikie]

The back end of the action is the same. It's the front action screw measurements that's different. I got a short action stock, moved the front screw hole up a bit (less than 1/4") and added a front pillar. Real easy to do before you get involved in bedding the action. ;)

[12fv 308]

Sharp shootersupply and Stockade gun stocks make stocks for the 4.52 spacing. Just tell them when you order...
Pete