RCBS Rock Chucker and Harnady Lock and Load

[Balljoint]

Saw on another gun form a trick using the Hornady LNL press conversion kit(044099) and die bushings(044096) on a RCBS rock chucker to change out reloading dies much faster and still have the same settings when changing out different dies.
Once i get everything in will start to set up press and try a few things.

[Blue Avenger]

Yes, more money for the convenience of quick change parts. LOL I have 40+ die sets. I'm not buying that many bushings!!! Yet!!!

[Balljoint]

Know what you say, i only load for three rifle one pistol so i know

[stevec]

I am using Hornady L-n-L bushings in my lee classic cast pres and I love them! I only bought 1 set to try them out but I am going to order more very soon.

Steve

[bythebook]

I think it would be less expensive to get a Forester press and just as easy to change dies. I have had mine for about 4 years and really like it.

[kdvarmint]

I have a Lock-N-Load and I have NO PROBLEM justifying buying the bushings. I buy them in the bigger bulk package and when I get a new die and come up short on a bushing I remember just how much they are worth to me.

[Blue Avenger]

I have a Lock-N-Load and I have NO PROBLEM justifying buying the bushings. I buy them in the bigger bulk package and when I get a new die and come up short on a bushing I remember just how much they are worth to me.
LOL Yes when I bought the adapter for the RCBS I bought a 10 pack to start with. But I also have 4 different presses so it requires thought as to what to convert.

[Balljoint]

Purchased a 10 pack and what i thought was the Adapter kit 0440099 but when it got to the door and opened it was an 044093 a three pack, so had to order the adapter again.
So now have the press adapter and 15 die adapters should cover my needs for now.

[sliderspal]

Saw on another gun form a trick using the Hornady LNL press conversion kit(044099) and die bushings(044096) on a RCBS rock chucker to change out reloading dies much faster and still have the same settings when changing out different dies.
Once i get everything in will start to set up press and try a few things.


Can you please explain what you mean ?

[Balljoint]

In answer to sliderspal with these adapter kits you will be able to change reloading dies (after set up) quickly between resizing, priming and then bullet seating

[Blue Avenger]

screw out this bushing...

http://img.photobucket.com/albums/v675/gcidso123/savage/reloading/img1328753792519.jpg

screw this one in...

http://img.photobucket.com/albums/v675/gcidso123/savage/reloading/img1328754051866.jpg



put this one on your dies and you have a quick change set up...


http://img.photobucket.com/albums/v675/gcidso123/savage/reloading/img1328754052258.jpg
http://img.photobucket.com/albums/v675/gcidso123/savage/reloading/img1328753793046.jpg