Trigger adjustments on new savage non accutriger?

[Rlbol]

I have tried searching but found nothing.
Is there any adjustments or information on tuning a newer non accutriger?
I believe it is a two screw? Everything I have been able to find is for a three screw trigger which I understand to be the older models??

[MaDa]

does it have the one tension wire that runs almost parallel with the barrel/action? if so look for a replacement wire. some use piano/music wire, or the wire from cheap buzz baits.

if it's not a single tension wire, then i don't know what to tell you. maybe either keep searching, grab a aftermarket trigger, or just stick around a while and you'll find it sooner or later...
God Bless, and good luck.
Matt

[stangfish]

http://twsniper.wordpress.com/budget-bull-barrel-build/savage-parking-lot/savage-110-trigger/