ruptured case

[hickhall]

when i fired this round i smelled burnt powder. i tried to eject it bolt came back brass stayed in the chamber it broke the extractor on the bolt. this was not reloaded ammo. it was a box of older 87gr remington. rifle 111 25-06. any idea what happened? could this have damaged the chamber


http://i774.photobucket.com/albums/yy23/hickhall/DSCF1015.jpg

[Blue Avenger]

check lot #with factory for recall.

[Eric in NC]

Did you buy the ammo new yourself (so you are sure it was factory ammo)?

[hickhall]

i didn't buy them myself got them from a friend but they apeared to be in the right box.

[Blue Avenger]

put up a couple unfired case pics.

[Apache]

Also, if you have a set of calipers, get a measurement of the loaded ammo case neck diameter please.

[GaCop]

You may have some flame pitting in the chamber so check it closely.

[hickhall]

http://i774.photobucket.com/albums/yy23/hickhall/DSCF1048.jpg



.284 loaded case neck measurement. what is the best way to check for the chamber for flame pitting? if it is pitted what will it effect.

thanks

[Grit #1]

Most likely the chamber is not flame "pitted". You could use cerosafe to check it. The brass was to soft in the web area that is why it ruptured. I would send the rest of the ammo back to Remington(looks like Rem. ammo) along with the cartridge that ruptured. They will replace the ammo, If the chamber was damaged they may replace the new barrel for you.
Best regards,
Grit