Receiver sight for a model 24v

[yorketransport]

Is there anyone who makes a receiver sight for the model 24v? I've poked around and haven't come up with anything yet. Am I missing something obvious here?

Andrew

[bigkelly]

not sure what you're calling a reciever sight but the place with the most selections is brownells

[Appleseed]

I have a set to try on the model 10 pistol on the way from the factory, called the custom shop and Effie put them in the mail. Do they keep parts for older models? Have you tried a ghost ring on any of your strykers? I may not use the front ramp and sight if you are interested. The rear is a Williams WGRS and fits the base drill holes.

[Mad Dog]

Lyman used to make one if you wanted the vintage look but they were hard to find, called the Lyman model 53D but it had to be D&T'd to make it fit.

[chj3]

I've fitted the Williams WGRS receiver sights to a couple rifles by selecting one that is for another rifle with a somewhat similar receiver profile and modifying the bottom of the sight and/or using a bit of metal epoxy or bedding compound to fill the gaps.