Mark 4 ring height on Savage 10/110 BA

[rogue111]

I have been searching around to find what height of Leupold Mark 4 Tactical rings would allow the bell of my Bushnell Elite Tactical (30mm tube/50mm bell) to have enough clearance on the stock rail that comes with the Savage BA's. I apologize if I have overlooked a topic covering this but I cannot find any information directly relating to this combination.

Thanks in advance,

Tim

[OrRedbeard]

I think you would probably need highs. Sit the scope on there and measure from the top of the base to the center of the scope tube. Med. rings are 0.84" highs are 1.06". I don't have that set up but I do have a SS 5-20X50mm scope in Seekins med rings and it. don't look like it would work with butler creek flip caps. I have never tried it as that scope my 300win mag. I got a different base for the 110ba so I could run my Vortex razor in low ring and keep the flip caps on and get more elevation out of the scope went to a 30moa base. Hope this helps.