View Full Version : Question about headspacing
gregmckinney
12-12-2011, 09:32 PM
Okay, new to the Savage line. Have a 1991 110 in .30-06. I want to replace the recoil lug with a thicker lug and have ordered pillars from Stocky's. With the barrel nut setup, will the barrel likely require machining, or can the headspace on these just be set with a "Go-Gauge" and then tightened into position? I already have all applicable wrenches. Thanks so much for the info.
nova1194
12-12-2011, 10:00 PM
No machining should be required, headspace it and tighten it down
Mike
fullersson
12-12-2011, 11:17 PM
+1 for nova1194. Brian Brown.
GaCop
12-13-2011, 08:06 AM
+1 for nova1194. Brian Brown.
+2, just that easy.
stangfish
12-13-2011, 09:48 AM
http://savageshooters.com/SavageForum/index.php/topic,29226.0.html
http://savageshooters.com/SavageForum/index.php/topic,39120.0.html
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.