Changing a bolt from 223 to 308-Help

[carpet1]

I am re-barreling my model 10 in 223 to a 308 bolt face. What parts do I need to change? It is almost new, by the way. ;D

[snider6464]

here are two different links that might come in handy
I know that often times you have to switch out the firing pin due to different sizes but im not sure if you will in this case.

http://www.gunnersgear.com/savage_pics/caliber_case_head_sizes.pdf

http://www.midwayusa.com/product/451988/savage-arms-bolt-head-short-action-savage-10-to-16-push-feed-right-hand-22-250-remington-243-winchester-260-remington-7mm-08-remington-308-winchester

[stangfish]

IF you would like to switch back and forth buy the magazine and the whole bolt, don't forget the 3 parts needed for the ejector. If it is a one time deal buy the bolt head The ejector parts and the extractor parts.

I think your list of parts would be 7 for the 4.4" action + magaine parts :
(same firing pin)
Bolt head (243, 260, 7mm08, 308, 338, 358)
Extractor
Extractor spring
Extractor detent ball
Ejector
Ejector Spring
Ejector retaining Pin
Magazine Parts

[jmccoy]

Mail me your complete bolt and magazine box and ill mail you mine back. We can swap. Just pay shipping.

Pm me if interested

[Netz]

You might also need the baffle if your .223 has the leg on it.
Curt