View Full Version : WSM magazine box??
bosstom
12-07-2011, 12:21 AM
I have a centerfeed short action that is currently setup in 243win and I would like to rebarrel to a WSM. Where can I find a WSM centerfeed mag box and what all do I need for the bolt head change (I want to keep it push feed)?
bbradford71
12-07-2011, 12:41 PM
Try this:
http://www.brownells.com/.aspx/pid=0/sid=335/schematicsdetail/110-111-112-112BT-Top-Loading
bosstom
12-07-2011, 08:23 PM
Try this:
http://www.brownells.com/.aspx/pid=0/sid=335/schematicsdetail/110-111-112-112BT-Top-Loading
This doesn't specify centerfeed / staggerfeed or 308 / wsm.
I found this box, but I think it might be for staggerfeed. Can anyone tell me?
http://www.midwayusa.com/product/587511/savage-arms-magazine-box-winchester-short-magnum-wsm-remington-short-ultra-magnum-rsum-blue
geargrinder
12-07-2011, 09:40 PM
This is the correct one.
http://www.midwayusa.com/product/793465/savage-arms-magazine-savage-10gc-11gc-14-270-winchester-short-magnum-7mm-winchester-short-magnum-300-winchester-short-magnum-325-winchester-short-magnum-2-round-steel-blue
bosstom
12-07-2011, 09:44 PM
This is the correct one.
http://www.midwayusa.com/product/793465/savage-arms-magazine-savage-10gc-11gc-14-270-winchester-short-magnum-7mm-winchester-short-magnum-300-winchester-short-magnum-325-winchester-short-magnum-2-round-steel-blue
So I just take the bottom of the box and put in the stock?
rinodods
12-08-2011, 06:37 AM
Well after you put the spring and follower in. ;D
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.