PDA

View Full Version : Pillar Bedding a Savage 110



larrys1911
11-17-2011, 11:51 PM
Need some help. I need some advice and info on Pillar bedding a stock.

I built a cherry stock for my 110 but I want to install pillars.

Question is where do I get correct Stock screws and pillars. Found pillars at brownells and screws that are for a Rem 700 but I dont know if the head is correct. They need to be slightly longer than the stock ones?

Any help here?

Larry

bbradford71
11-18-2011, 12:27 AM
Here you go

http://www.brownells.com/.aspx/pid=0/sid=335/schematicsdetail/110___111____112___112BT_Top_Loading

tiny68
11-18-2011, 01:42 AM
I got this pillar kit off of Ebay and it worked perfect for the rifle I build my son. I will get another of the same for the next build. Luck, Tim

http://www.ebay.com/itm/Gunsmith-Accuracy-Pillar-Bedding-Kit-Savage-110-111-/190566168034?pt=LH_DefaultDomain_0&hash=item2c5ea0f5e2#ht_2561wt_1375

bsekf
11-18-2011, 10:58 AM
I use aluminum spacers from McMaster-Carr.

larrys1911
11-18-2011, 02:54 PM
Thanks for the help guys and Ill definately checkout the spacers from MM
Now where to find screws that are longer than stock savage ones???

Larry

bbradford71
11-18-2011, 03:16 PM
Ask and you shall receive

http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Main=254893&Number=2910969#Post2910969

davemuzz
11-18-2011, 04:11 PM
WOW!!! I'm impressed!!.....When they said you guys were full of it...they were right! ;D Ummm, useful information I mean!! ;) ;D

josebd
11-18-2011, 04:19 PM
the screws are 1/4x28,i got mine at ace hardware

Nor Cal Mikie
11-18-2011, 05:52 PM
Get them long, spin a nut on them, cut them a bit longer than needed then polish the ends smooth, spin off the nut, check the threads, done deal. :o

justinp61
11-19-2011, 09:38 AM
Fastenal is a good place to get the screws, they have many different head styles.

GaCop
11-20-2011, 08:47 AM
the screws are 1/4x28,i got mine at ace hardware


+1 for ACE. I learned the hard way Lowe's doesn't carry them..