View Full Version : Single shot adapters
durango
11-13-2009, 04:18 PM
Does anyone market an adapter that fits into the staggered feed magazines so I can load one at a time? I need one for a Striker and one for a 12 to start with--both are .223 case size. Thanks, Steve
pdog06
11-13-2009, 06:02 PM
Score-Hi makes the one you need. You can get them from MidwayUSA, Brownells, and SSS. They make a small(204,223, sized magboxes), medium(reg short action length), and large(long action length).
Both guns should take the same follower.
pdog06
11-13-2009, 06:08 PM
Here ya go..
http://www.midwayusa.com/viewProduct/?productNumber=325484
durango
11-13-2009, 11:13 PM
Thanks Pdog--thats what I needed- Steve
jpdown
11-18-2009, 08:03 PM
If you have the newer centerfeed, SSS has developed a single-shot follower that IMO is better than the Hi-Score.
durango
11-22-2009, 08:44 PM
OK, Midway has delivered three of the score-hi followers. I chose to do the striker first--now I need a tutorial on disassembly of the magazine/trigger linkage. I guess that I could just take a hammer and punch to it, but I'm sure there's a right and wrong way to do it. Help, please. Steve
Blue Avenger
11-22-2009, 09:26 PM
bottom slides off.
durango
11-22-2009, 09:48 PM
Thanks--I'll give it a try. Steve
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.