PDA

View Full Version : What bullet for 223



Pages : [1] 2

nivlac1960
10-31-2011, 06:23 PM
I have a Savage Varminter 223 with a 1-9 twist rate and a 26" barrel. What would be the optimum bullet (weight, length and type) for coyote hunting? I would be shooting out to 300yds. at the most. I have quite a bit of H335 powder on hand also.

1Shot
10-31-2011, 06:42 PM
..About 26grs H335 with a 50gr NBT should get-er done...Or 26.1grs of Benchmark & a 55gr NBT.. ;D..

laportecharlie
10-31-2011, 06:44 PM
Both real good choices. I've had good luck also with TAC and 55 gr V-Max.
Charlie

DennisH87
11-06-2011, 11:05 PM
I've got an ar with 1:8 twist and a savage with 1:14 so I settled with 23.5 gr benchmark and 55 gr vmax. The ar will shoot them sub moan and the bolt action about 3/4" at 100 yards. Accurate out to 500 yards in both rifles.

trailrider121
11-06-2011, 11:24 PM
I'm currently shooting 25.8grs imr 8208 with 50gr NBT.Getting 3228 avg out of 22" stevens barrel. I've shot it out to 450 yards.

airaddict
11-06-2011, 11:46 PM
my single shot 223 will put 50 gr vmax's on top of each other all day long with 27gr of varget but it did not like the 53gr barnes at all! And the funny thing is that when i started loading the 50 gr vmax's i just picked a random load and seating depth and it just so happened to be the miracle load.

Now i have a model 12 FV i picked up on a trade and im gonna try out the barnes on it and maybe some partitions or accubonds for hunting but for competition i plan to use the 68gr hornady HPBT.

brian

tiny68
11-06-2011, 11:49 PM
Probably overkill - but a 69 SierraMatchKing and Varget seem to be a perfect combo in each Savage 1:9 twist I have tried. Great performance with this bullet. Personally never used in on a coyote, by crows go "poof". Luck, Tim

airaddict
11-07-2011, 12:00 AM
i cant wait for hornady to put out the bullets for 224 in the GMX. I know they are making loaded ammo already and i read that bullet will be in a 55 gr version. I loved the gmx in 308.

Brian

psharon97
11-07-2011, 11:23 AM
My go to load for 223 is 55g hornady v-max topped with 21.5g of IMR 4198.

Quickshot
11-07-2011, 12:28 PM
I have had the best luck with 26.5 Varget and 50 gr. Sierra BKs and also 26gr. Varget with 60gr. Berger flat base hp. Tried heavier bullets but just never was able to get one satisfactory. The 50gr Sierra will definately stop a coyote. Used the 60s more for paper shoots. Quick

Ring31
11-09-2011, 02:53 PM
the new 53 vmax has a better BC then the 60's and will do 3400fps in a 223

A_Gamehog
11-11-2011, 02:11 PM
+1 on what Ring31 said, used with 8208 XBR it can't be any better.

Dennis
11-11-2011, 08:57 PM
26gr. Varget with 60gr. Berger flat base hp.

Will have to try these.

What speeds do you obtain with the above load?

JW
11-12-2011, 08:51 AM
55 gr Sierra Gameking HPBT 26.0-26.9 Varget
This bullet is extremely accurate in every 223 I have tried it in
.3 to .5 3 shot groups at 100 yds are common (stock stevens 223)
Friends have taken hogs with this load, one actually took an axis deer
I load the same bullet in 22-250 for a friend, he says coyotes hate them

GaCop
11-13-2011, 06:55 AM
26gr. Varget with 60gr. Berger flat base hp.

Will have to try these.

+1

1Shot
11-13-2011, 12:31 PM
Both real good choices. I've had good luck also with TAC and 55 gr V-Max.
Charlie


...25.7grs of TAC with 60gr Sie. Flat Base HP... ;)

CGcook
11-17-2011, 08:10 PM
69 Gr matchkings 21.5 gr varget CCI primers. 7 shot .5" in groups

darkker
11-17-2011, 08:18 PM
Sierra's varmint bullets, and Hornady's V-max are fine with the info supplied.
Remember that Rotation is what kills bullets.
As an example: Midway's Dogtown bullets are only good for @ 240,000 RPM

nivlac1960
11-24-2011, 03:47 PM
I just loaded Hornady 68gr BTHP Match and Nosler 69gr HPBT Custom Competition bullets over 23gr-24.5gr H335 powder. Will be going to the range shortly to check accuracy of loads.

Quickshot
11-24-2011, 08:06 PM
Sorry to be so late getting back on the Vel. for the 60 gr. Bergers and 26gr. Varget. Searched my logs and can't find anything for sure but seem to recall it was right around 3000. I try to keep all of my loading in that range so I'm pretty sure thats real close. I haven't had any pressure problems with that load. Quick