PDA

View Full Version : difference in a 110 stock to a 111 stock



mpearcex
10-28-2011, 08:38 PM
Ok I'm looking at finishing my 110 build and saw a ggod price on a savage 111 stock. Will it fit. They are both long actions with blind mags. But I know the 111 is a centerfeed and my 110 is stagger. Does that make a difference in the stock? Also first post.

bootsmcguire
10-29-2011, 12:07 AM
on the LA (110/111) series guns the action screw spacing is the same when going from CF to SF (center to stagger) but the mag well on the CF is a little smaller and will require some work on opening it up to accept the SF mag. Not a huge deal but will need to be done. The Short Action guns are a different story.

ellobo
10-29-2011, 01:23 AM
WElcome to the brotherhood of the barrel nut. Stick with this forum and you will not regret it.

El Lobo

mpearcex
10-29-2011, 02:30 AM
Well that does help. Glad to be hear. Owner of just three Savages though.
Savage 10 PC (.223)
Mark II non-accu trigger
and my 110E that is now a 308 in need of a new stock.
Thanks

bootsmcguire
10-29-2011, 10:59 AM
Might I suggest that you look into a B&C Duramaxx. Not expensive, readily available, and good quality for the price range. Normally you can get 'em for around $100, Midway usually has them. Ant they are available for the 110 SF.