View Full Version : picked up a mcgowen barrel from a member here and want to ream it out some
lal357
10-23-2011, 09:59 PM
like it says i have a lrpv in 223 and shoot 75gr amax's @ 1.941 ogive for .01 off the lands the new barrel has a shorter chamber same bullet measured 1.873 ogive new barrel shoot good but i was wondering if its possible to ream the chamber down on the mcgowen so that i can seat the bullets out the same . also want to shoot some 80gr. amax thru it .
airaddict
10-23-2011, 10:35 PM
got a hold of Sinman or NSS or SSS. Im sure one of them can ream out ur throat to the same dimensions. maybe we will get a few more gunsmith savey people to give their advice.
brian
dcloco
10-23-2011, 11:07 PM
Yes, they definitely can. Just a little throating an go.
.....or....make it a 223 AI. 75 gr AMax's run 3150 out of a 26" barrel with ease.
If going to run 80 gr AMax's, I would ream to 222 Magnum AI...and use 204 Ruger brass (a LOT cheaper than magnum 222).
I run my 223 AI reamer deep and use 204 Ruger brass necked up. 80 gr AMax's in a 1:8 or 1:7 twist barrel fly accurately a LONG ways. 1000 yards is an easy poke for those lawn dart 80's.
lal357
10-24-2011, 05:52 AM
i have to keep it 223 since i will be using it in f-class matches it liked the 69 smk's and 75 amax's but i would like to shoot this one @500yrd matches hence the wanting to go with 80gr bullets
GaCop
10-25-2011, 07:02 AM
i have to keep it 223 since i will be using it in f-class matches it liked the 69 smk's and 75 amax's but i would like to shoot this one @500yrd matches hence the wanting to go with 80gr bullets
You can do that with a 1 in 8 twist barrel.
lal357
10-29-2011, 05:34 AM
have any load data other than varget and rl-15 have a gun show next week and can pick up powder there (more selection) .i tok it out last weekend it did ok with 69grsmk's over varget (5/8 groups) and 75gr amax over varget (3/4-1") i'm hoping to load up some with rl-15 for the next time i have off.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.