Measurement of Rear of Action.

[L.H. Clark]

Hey guys, I am wondering if anybody would care to take the time to mic the rear of any Round Rear action. I am looking for what the outside circumference is. As I don't have a later-model action handy, I can't get the measurement myself.

If this isn't too much trouble for anyone, I would appreciate it. Just the mic measurement from top, where the base screw holes are, to the bottom of the action. It should be a simple measurement to take.

Thank You to whoever will help me with this measurement!

Thanks Again,

L.H. Clark

[ellobo]

Round rear recievers should be the same dia front and back. Mine are flat back but when I tried to measure the front for you I couldnt due to the scope being mounted and I was not about to remove that. Sorry. Even if they were round rear I couldnt measure for the same reason. I was using a vernier as my mike is only one inch.
El Lobo

[keeki]

1.337 best i could tell. kinda hard to get under my scopes. I measured 4 of them and they were all the same

[stangfish]

1.350 +/-