PDA

View Full Version : ring marks


birdie
10-19-2011, 06:18 PM
???any brainsstorms on how to cover ring marks on a black matte scope?
GaCop
10-20-2011, 06:40 AM
You could try some Birchwood-Casey aluminum black. Make sure the are is degreased well and apply with a Q-tip until you get the desired color and wipe with a paper towel. It won't be perfect but better than nothing.
birdie
10-21-2011, 10:34 PM
;) thank you
243LPR
11-06-2011, 09:58 PM
Black Sharpie ;D
GaCop
11-08-2011, 08:48 AM
Black Sharpie ;D


Yes, that will cover them too but, the sharpie is a bit darker than the scope finish and does show.
Don - LongRangeSupply
11-17-2011, 07:23 PM
Depending on the alloy, the Birchwood Casey gun blue pen will darken scratches in aluminum alloy even though it's made for steel. Another solution is to camo paint your entire scope.

Next time use Burris Signature rings, usually no marks of any kind. Sometimes minor change in the matte finish, sort of a burnished look, but most instances there is nothing left by the rings.
MaDa
11-17-2011, 10:55 PM
.

Next time use Burris Signature rings, usually no marks of any kind. Sometimes minor change in the matte finish, sort of a burnished look, but most instances there is nothing left by the rings.




+1

I'm in the process of switching all my rings over to these