PDA

View Full Version : ER Shaw 6.5 group buy



Pages : [1] 2 3 4

JavRGV
09-23-2011, 02:36 PM
I jumped on this deal and ordered a 6.5x55 and to say that I am pleased with it is an understatement. I am shooting some remarkable groups with Berber Bullets and cant wait to try them out this deer season. How about the rest you all, what kind of results are you all getting ?

montana bob
09-24-2011, 03:14 PM
I just ordered a 6.5x55 barrel a few minutes ago. How long ago did you order and how long before delivery. Was it the varmint contour?

JavRGV
09-24-2011, 03:45 PM
It took about 8 weeks and it was the factory contour.

logic factory
09-25-2011, 12:48 AM
ill ask the question here as it looks like i do not have the privileges to do so in your thread 260 rem; what does a varmint contour mean? how does its weight/contour compare to other options?

savageboy
09-25-2011, 02:58 PM
http://www.shilen.com/savageBarrels.html

Go to middle of page, it will explain it w/ a picture- and measurements.

JavRGV
09-25-2011, 09:39 PM
Hey260

Its a shooter now I'm thinking of a 6.5x284 or 6.5 Creedmore. These are some awesome barrels.

Jav

seanhagerty
09-25-2011, 10:05 PM
havent even shot my 260 rem and now I have TWO barrels for it!!! Plus I figured since I was there I should order a trigger......

Awesome price on both. Thanks for the deals!!

Sundo
09-26-2011, 12:16 AM
I've been dreaming of a 6.5 Swede barrel for my 116 FCSS.

Will the Accustock on the 116 FCSS Weather Warrior fit around a varmint contour barrel?

CJ in WY
09-26-2011, 04:58 AM
Bought the sporter barrel a while back in 6.5-284 and swapped out the 25-06 barrel on the Axis. Took it out yesterday with H4831sc and 140Bergrs,Amaxes and 110 grain GS bullets=Everything went inside an inch@ 150yards and the Amaxes went into one ragged hole. Not bad for just throwing loads together.......Specialy out of a $275 gun with a $112 barrel.

BoilerUP
09-26-2011, 11:54 AM
You swapped a 110 barrel on an Axis?

Did it just thread right on?

thomae
09-26-2011, 01:06 PM
You swapped a 110 barrel on an Axis?

Did it just thread right on?


Pardon me for answering for you CY, but to BoilurUP: Yup, that's what it does.
All the best.

CJ in WY
09-26-2011, 03:52 PM
You swapped a 110 barrel on an Axis?

Did it just thread right on?


Yes sir it sure did. About the only thing the axis has in common with the old standard shank Savage/Stevens!
I told myself when I bought the Axis it was not getting molested.....other than reworking the trigger. BUT . That sporter barrel looked very out of place on any of my other riggs. I only have one lite savage= the Axis. The 25-06 was not shooting too bad for what it is but man alive does that 6.5-284 Shaw barrel shoot!!! It is however one dirty/copper fouling pig! Only have 25 rounds down the barrel so far so it may very well smooth out?

lskok
09-27-2011, 08:35 AM
ill ask the question here as it looks like i do not have the privileges to do so in your thread 260 rem; what does a varmint contour mean? how does its weight/contour compare to other options?

Here are the specs on the different contours. The A column is the length. The F column is the muzzle diameter.

SavageŽ Replacement Barrel Contours and Weights (using barrel nut)
Contour A B C D E F Weight
Standard 24" 1.060" 2" N/A N/A .565" 2lbs., 10oz.
Standard Mag. 26" 1.060" 2" N/A N/A .675" 3lbs., 3oz.
Heavy Mag. 26" 1.060" 2" N/A N/A .705" 3lbs., 4oz.
Varmint 26" 1.060" straight taper .850" 4lbs., 8oz.

lskok
09-27-2011, 08:40 AM
I've been dreaming of a 6.5 Swede barrel for my 116 FCSS.

Will the Accustock on the 116 FCSS Weather Warrior fit around a varmint contour barrel?


The 116 FCSS stock is for a factory contour barrel and will not fit a varmint contour barrel without widening out the barrel channel.

Sundo
09-27-2011, 09:45 PM
I've been dreaming of a 6.5 Swede barrel for my 116 FCSS.

Will the Accustock on the 116 FCSS Weather Warrior fit around a varmint contour barrel?


The 116 FCSS stock is for a factory contour barrel and will not fit a varmint contour barrel without widening out the barrel channel.


I was afraid of that.

The next obvious question is, is there an aftermarket stock that will fit a 116 FCSS action and a varmint contour barrel?

lskok
09-27-2011, 10:21 PM
I've been dreaming of a 6.5 Swede barrel for my 116 FCSS.

Will the Accustock on the 116 FCSS Weather Warrior fit around a varmint contour barrel?


The 116 FCSS stock is for a factory contour barrel and will not fit a varmint contour barrel without widening out the barrel channel.


I was afraid of that.

The next obvious question is, is there an aftermarket stock that will fit a 116 FCSS action and a varmint contour barrel?

I'm pretty sure the Bell & Carlson Durramax will work but I would give Stocky's a call to make sure. The Durramax is a nice stock and is not very expensive.

Sundo
09-28-2011, 12:05 AM
I've been dreaming of a 6.5 Swede barrel for my 116 FCSS.

Will the Accustock on the 116 FCSS Weather Warrior fit around a varmint contour barrel?


The 116 FCSS stock is for a factory contour barrel and will not fit a varmint contour barrel without widening out the barrel channel.


I was afraid of that.

The next obvious question is, is there an aftermarket stock that will fit a 116 FCSS action and a varmint contour barrel?

I'm pretty sure the Bell & Carlson Durramax will work but I would give Stocky's a call to make sure. The Durramax is a nice stock and is not very expensive.


I checked on the Bell & Carlson Durramax and found those stocks only work on the older, non-center-fed magazine rifles. They don't work with the new center-fed versions.

lskok
09-29-2011, 03:49 PM
I've been dreaming of a 6.5 Swede barrel for my 116 FCSS.

Will the Accustock on the 116 FCSS Weather Warrior fit around a varmint contour barrel?


The 116 FCSS stock is for a factory contour barrel and will not fit a varmint contour barrel without widening out the barrel channel.

The Duramaxx will work but you will have to do some minor work to fit the magazine. You can find info on this tread:

http://savageshooters.com/SavageForum/index.php/topic,29144.0.html

I was afraid of that.

The next obvious question is, is there an aftermarket stock that will fit a 116 FCSS action and a varmint contour barrel?

I'm pretty sure the Bell & Carlson Durramax will work but I would give Stocky's a call to make sure. The Durramax is a nice stock and is not very expensive.


I checked on the Bell & Carlson Durramax and found those stocks only work on the older, non-center-fed magazine rifles. They don't work with the new center-fed versions.

Hunterdude
10-02-2011, 09:55 AM
How do you get in on this group buy?

lskok
10-02-2011, 11:14 AM
How do you get in on this group buy?


Here is the direct link:

http://www.gunshack.com/65ERSHAW