View Full Version : Magnum bolt head for a RBLP target action
Samdweezel05
08-26-2011, 07:58 PM
Basically want to turn a target action into a RUM action. Do I need a different bolthead due to the RBLP configuration or do you just turn it upside down?
pdog06
08-26-2011, 08:41 PM
pretty sure you just need a LH bolthead. Atleast thats what worked when I switched a target action from a 204 to a 243.
pdog06
08-26-2011, 08:45 PM
did see this over on 6mmbr though., just dont know if it is for a right, left, or dual port.
http://forum.accurateshooter.com/index.php/topic,3770603.0.html
Samdweezel05
08-26-2011, 08:45 PM
pretty sure you just need a LH bolthead. Atleast thats what worked when I switched a target action from a 204 to a 243.
You are the smartest person ever. Now send me that .22-250.
Samdweezel05
08-26-2011, 08:55 PM
did see this over on 6mmbr though., just dont know if it is for a right, left, or dual port.
http://forum.accurateshooter.com/index.php/topic,3770603.0.html
I bought it, thanks.
noelfr
08-26-2011, 08:57 PM
Rats...I had to register on the site first. You must have beat me by seconds.
pdog06
08-26-2011, 09:07 PM
Dang Phil, you didnt waste any time on that one....LOL
Not gettin the .22-250 though.....
Samdweezel05
08-27-2011, 12:37 PM
It just so happens that I need a firing pin as well so that worked out perfect.
pdog06
08-27-2011, 09:07 PM
Glad it worked out for you.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.