Free float problem

[adam330]

I recently had some barrel work done and when i went to put the barreled action back into the stock i noticed it is no longer free floating? I have a Choate tactical stock. Every thing is fine untill i start to torque the front action screw, it pulls the front of the barrel down against the stock. Do i have the screws in the wrong spots, i have the longer screw in the trigger guard and the shorter one up front? Im not sure why this is doing this now. Any help is always appreciated.

Thanks,
Adam

[jsthntn247]

If it is floating until you tighten your action screws, you need to bed the action. Once is bedded, you can remove some material from the barrel channel if need be.