PDA

View Full Version : Kick-eez for 110FP - Which one?



kludge
07-05-2011, 03:16 PM
Does anyone know off hand which pre-fit Kick-eez recoil pad will fit my 110FP stock?

Thanks!

rez187
07-05-2011, 08:50 PM
yah the best kickezze is called a limb saver!

jpdown
07-05-2011, 11:17 PM
From my experience, it is best to do a search for the Kick-eez recoil pad templates. See link below. You can print off, remove your current pad and find the recoil pad that matches your stock the closest. That way you will only have to do minor sanding of the base, if necessary, for a perfect fit.

www.kickeezproducts.com/templates.php (http://www.kickeezproducts.com/templates.php)

aztec223
07-06-2011, 07:06 PM
From my experience, it is best to do a search for the Kick-eez recoil pad templates. See link below. You can print off, remove your current pad and find the recoil pad that matches your stock the closest. That way you will only have to do minor sanding of the base, if necessary, for a perfect fit.

www.kickeezproducts.com/templates.php (http://www.kickeezproducts.com/templates.php)


Just make sure your printer is set for the proper scale, otherwise they come out slightly smaller than actual size. Been there, done that, got the T shirt!

DresserDan
07-06-2011, 08:14 PM
I posted this same question and never found anyone that could say for 100% that which one fit.I even e mailed the company and they dont know.So good luck.If you find out let us all know which one it is for sure.From what little info I got it came down to either #10601 or #10011

aztec223
07-06-2011, 08:44 PM
I posted this same question and never found anyone that could say for 100% that which one fit.I even e mailed the company and they dont know.So good luck.If you find out let us all know which one it is for sure.From what little info I got it came down to either #10601 or #10011

I put a 10011 on mine and it fir almost perfectly, the only problem was with my stock not the Limbsaver pad.