AK4900PA
06-20-2011, 01:40 PM
I have a 112 BVSS that is still new and unfired. I attempted to dry fire the rifle the other day and the safety blade in the trigger was locked up. I tried racking the bolt over and over again, soft and hard, and it keeps tripping the safety blade. I thought maybe the trigger was set too light, so I took the barreled action out of the stock to increase the trigger weight a bit. When I took the action out it set the trigger perfectly each time I racked the bolt so I left the trigger weight alone. As soon as I put the action back into the stock I was back to the same problem.
The only thing I can figure is that I need to inlet the stock a bit more to allow the trigger assembly to function properly. Everything worked just fine when I bought the rifle a few months ago. I can't figure out what changed.
The only thing I can figure is that I need to inlet the stock a bit more to allow the trigger assembly to function properly. Everything worked just fine when I bought the rifle a few months ago. I can't figure out what changed.